specifications pin material: brass alloy 360, 1/2 hard swage pins are annealed dimension in inches tolerances on: lengths: .005 diameters: .002 angles: 2 order code: xxxx - x - 05 - xx - 00 - 00 - 01 - 0 basic part # specify pin finish: 01 200 " tin/lead over nickel 15 10 " gold over nickel 21 20 " gold over nickel mill-max-mfg.corp., p.o. box 300, 190 pine hollow road, oyster bay, ny 11771-0300.tel: 516-922-6000 fax: 516-922-9253 183 103x-x-05-xx-00-00-01-0 press-fit in .057 mounting hole 1030 ? ? 1032 1214-0-05-xx-00-00-01-0 press-fit in .059 mounting hole 1214 1302-0-05-xx-00-00-01-0 press-fit in .057 mounting hole 1302 1212-0-05-xx-00-00-01-0 press-fit in .061 mounting hole 1212 1097-0-05-xx-00-00-01-0 swage mount in .094 hole for .062 thick board 1097 1216-0-05-xx-00-00-01-0 press-fit in .056 mounting hole 1216 1213-0-05-xx-00-00-01-0 press-fit in .061 mounting hole 1213 1095-0-05-xx-00-00-01-0 swage mount in .094 hole for .062 thick board 1095 0318-3-05-xx-00-00-01-0 press-fit in .057 mounting hole 0318 wrapost terminals basic part number 1032-1 1031-2 1030-3 wrapost length a .260 .360 .500 # of wraps 1 2 3
|
